Maedler Webshop - Silver Steel Material Nr. 1.2210 (115CrV3) According to DIN 175 (h9) Ground and Polished

Mainmenu

Search

Catalog-Navigation

Linear motion guide Accuride DA 115 R
DIN-Standardized Parts
- DIN 14 - Splined Shafts and Splined Hubs
- DIN 39 - Fixed Handles
- DIN 98 - Revolving Handles
- DIN 99 - Clamp Nuts
- DIN103 - Trapezoidal Spindles and Nuts, single thread, right hand
- DIN103 - Trapezoidal Spindles and Nuts, single thread, left hand
- DIN103 - Trapezoidal Spindles and Nuts, double thread, right hand
- DIN 115 - Box Couplings
- DIN 172 - Cylindrical, Flanged Drill Bushes
- DIN 175 - Silver Steel Material Nr. 1.2210 (115CrV3) h9 Ground and Polished
- DIN 179 - Cylindrical Drill Bushes
- DIN 319 - Ball Knobs
- DIN 444 - Swing Bolts
- DIN 464 - Knurled Thumb Screws
- DIN 466 - Knurled Nuts
- DIN 467 - Knurled Nuts
- DIN 468 - Hand Cranks
- DIN 469 - Hand Cranks
- Retaining Rings DIN 471
- DIN 502 - Flange Bearings
- DIN 503 - Flange Bearings
- DIN 504 - Heavy-Duty Pillow Block Bearings
- DIN 505 - Cap Bearings
- DIN 508 - Nuts for T-Slots
- DIN 648 - Rod Ends and Spherical Bearings
- DIN 703 - Adjusting Rings
- DIN 705 A - Adjusting Rings
- DIN 766 A - Round-Link Steel Chains
- DIN 787 - Bolts for T-Slots
- DIN 808 - Universal Joints
- DIN 934 - Hexagon Nuts
- DIN 950 - Handwheels
- DIN 975 - Threaded Bars
- DIN 1478 - Turnbuckles
- DIN 1479 - Hexagon Turnbuckles
- DIN 1850 - Bushes
- DIN 2215 - V-Belts
- DIN 3411 - Stauffer Grease Boxes
- DIN 3670 - Solid-Disk Handwheels
- DIN 6303 - Knurled Nuts
- DIN 6311 - Thrust Pads
- DIN 6319 - Spherical Washers / Conical Seats
- DIN 6330 - Hexagon Nuts
- DIN 6331 - Hexagon Nuts
- DIN 6332 - Grub Screws
- DIN 6334 - Extension Nuts (Height 3 x d)
- DIN 6335 - Palm Grips
- DIN 6336 - Star Grips
- DIN 6340 - Washers
- DIN 6880 - Bright Key Steel
- DIN 6885 - Feather Keys (Parallel Keys)
- DIN 7753 - Narrow V-Belts
- DIN 8187 - Roller Chains
- DIN 12240 - Rod Ends and Spherical Bearings
- DIN 71751 Clevis Joints
- DIN 71752 - Clevises
- DIN 71802 - Angle Joints
Gear Boxes and Geared Motors
Spindles, Spline Shafts and Nuts
Knobs, Handwheels, Handles, Operating Elements
Bevel Gears, Worm Wheels, Worms
V-Belts, Pulleys, Accessories
Sprockets, Chains, Accessories
Clamp Collars, Shaft Collars (Adjusting Rings)
Couplings, Friction Clutches, Safety Couplings
Standardized Parts and Miscellaneous
Linear Motion, Linear Bearings, Precision Rail Guides
Metal-Rubber-Buffers, Dampers
Maintenance and Repair Sprays, Loctits Products
Pneumatic Elements
Ball Bearings, Block Bearings, Bushes, Drill Bushes
Clamping Sets, Clamping Bushes, Taper Bushes
Accuride - Telescopic Slides and Linear Guides
Universal Joints
Spur Gears, Toothed Racks, Internal Gears, Ratchet Wheels
Timing Belts, Pulleys, Accessories

Silver Steel Material Nr. 1.2210 (115CrV3) According to DIN 175 (h9) Ground and Polished

Unhardened, strength 700 - 800 N/mm².

Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible.

Fixed lengths can be delivered on request.

Service:

ArticleID		Quantity		Diameter [mm]	Length [mm]	Weight per m [kg]
64700200				2	500	0,02
64710200				2	1000	0,02
64720200				2	2000	0,02
64700300				3	500	0,06
64710300				3	1000	0,06
64720300				3	2000	0,06
64700400				4	500	0,11
64710400				4	1000	0,11
64720400				4	2000	0,11
64700500				5	500	0,15
64710500				5	1000	0,15
64720500				5	2000	0,15
64700600				6	500	0,22
64710600				6	1000	0,22
64720600				6	2000	0,22
64700800				8	500	0,39
64710800				8	1000	0,39
64720800				8	2000	0,39
64711000				10	1000	0,62
64721000				10	2000	0,62
64711200				10	1000	0,89
64721200				10	2000	0,89
64711400				14	1000	1,21
64721400				14	2000	1,21
64711500				15	1000	1,38
64721500				15	2000	1,38
64711600				16	1000	1,57
64721600				16	2000	1,57
64711700				17	1000	1,78
64721700				17	2000	1,78
64711800				18	1000	2,00
64721800				18	2000	2,00
64712000				20	1000	2,45
64722000				20	2000	2,45
64712500				25	1000	3,83
64722500				25	2000	3,83