Material: Steel.

• For fixing a hub (e.g. drive wheel,


• rotor or similar) on a shaft.


• For high torques.


• Self-centering.


• Axial offset during mounting (can be compensated by correct positioning).

Tolerances, Surfaces
Ø-tolerance for shafts and hubs: +/- 0.08mm.
Roughness of shaft and hub: Ra 0.08 to 3.2 µm.
Eccentricity of the clamping set: Max. 0.025mm.

Mounting
It is essential to degrease the shaft and hub.
Install clamping sets as delivered, never lubricate them.
Tighten them with a torque wrench to the torque values
as per the table.